Home
Wilson (859902) Lightning Surge Protector

Wilson (859902) Lightning Surge Protector

Email to a Friend

$69.95

Availability: In stock

Qty:

Quick Overview

Helps protect amplifier from power surges such as those caused by lightning strike to outside antenna. Protector is inserted inline between outside antenna and amplifier. The protector does not connect directly to the amplifier. Typically, a 2' 9913 jumper cable is used to connect the protector to the amplifier although any length of 9913 coax may be used. For example, you can run 9913 coax from the Yagi on the roof to the lightning protector (mounted just outside the building) and then another run of 9913 coax cable from the lightning protector to the amplifier mounted in the building. The lightning protector must be grounded. Specifications: dB Loss: 0.2dB Connectors: N/Female, both ends

Wilson-859902

Double click on above image to view full picture

More Views

Details

The 859902 Wilson surge protector is an inline surge protector that can be used with all Wilson external antennas. The unit is installed inline between the antenna and the amplifier. Protection is given by a gas tube element, which can be replaced to provide multistrike capacity. A ground lug and terminal are supplied directly on the protector housing. The protector does not connect directly with the amplifier, and a small length of cable is needed. You can use the Wilson400 coaxial cable for this purpose. The lightening protector must be grounded. Technical Specifications Product Reference 859902 Frequency Range 0-3GHz dB Loss 0.4dB Max Impedance 50 ohm (not suitable for WiEx repeaters) Gas Tube Voltage 90V Rated Connectors N/Female both ends

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.